Home > Rebreather Parts > APD EVOLUTION >

APD Evolution stand

evolution rebreather stand


 
Alternative Views:


Our Price: £145.60 (174.72 inc VAT)

Stock Status:In Stock
Product Code: 0009
Qty:

Description
 
These stands have been designed to fit the APD Evolution and Evolution+ rebreather.

Using the stand makes donning and doffing the unit much easier as it rises the units up by approximately 5.3" (135mm)

This takes the weight of your lower back whilst sitting on boats,
but also removes backache whilst diving by transferring the weight from the small of your back to your buttocks, this makes a massive difference on longer dives

The stand is made from a marine grade aluminium with a glass blasted finish and is very durable and very pretty

The edges are rounded to give a professional finish leaving no sharp edges

The total weight of the stand is approx 1.5kg out of water and is perfectly balanced, the in water weight is very slightly negative but because of the balance you should have no problems with trim.

There is enough room under the base to store lift bags, SMB's or battery packs to suit inflator tank.
we have cut in a number of holes and slots so you can add bungees to hold items.

All bolts needed for standard fitting(no drilling) come with the stand.

But there is also extra bolts added if you wish to drill the APD case.(THIS IS OPTIONAL)
Adding the extra bolts and drilling the 4 holes in the plastic case vastly improves the stability of the plastic rebreather case as it suffers a lot of twisting normally
Features
  • MARINE GRADE ALUMINUM
  • ALL BOTS INCLUDED
  • REMOVES THE WEIGHT FROM YOUR LOWER BACK
  • ROOM TO STORE ITEMS IN THE BASE
  • PERFECT BALANCE

Average Rating: 5 of 5 Total Reviews: 9 Write a review »

  0 of 0 people found the following review helpful:
 
Ap stand August 30, 2018
Reviewer: Michael Smith from Lichfield, Staffs UK Mainland  
I asked when ordering if this will fit inspiration xpd, to which I was told there is no reason why not.   The hole positions are out ( evo box is shorter) and it needs a slight crank to get it to fit.  You do have to drill the case for it to be a sturdy assembly.  Once these minor issues were overcome in an hour or so it was done.   Diving it works well,  lifting the box up to take the weight off your shoulders.  Plenty of room below to mount stuff,  even suit cyl.  You can feel it but not too intrusive.  A good option if you want to keep std box.  I did note the studs on the bottom scratch surfaces, so have replaced those with nylon blocks.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Evo Stand for Prism 2 February 6, 2016
Reviewer: Ben from UK  
Excellent service as usual from John, stand looks great, will be testing it very soon.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Evo Stand October 28, 2015
Reviewer: James Stanard from Riverside, CA United States  
excellent item , awesome service, great communication

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Really well made and finished August 8, 2014
Reviewer: donzo from london  
This is a quality item and looks very slick!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
APD Evolution stand June 26, 2014
Reviewer: Jean-Pierre Crisa from PAPEETE, tahiti French Polynesia  
Good Réception

Tank You

Best regard

Jean-Pierre

Was this review helpful to you?

View All Customer Reviews