FITS OLD STYLE PLASTIC AND METAL BATTERY HOLDER (BUT NOT THE RECHARGEABLE BATTERY HOLDER)
Everything you need to connect your 3 cell monitoring computer to your Vision rebreather.
Full redundant backup 3 cell PO2 monitoring
No dive computer included with this item
This is a Fischer connector system it is not suitable for vrtechs opticon system
sold so many of these that rebreather manufacturers have made special tools to help service clients units with them on!
Note - do not change the lock nut supplied by APD, they have special tools that will only fit their nut.
Have you ever wished you had a fully independent backup to your rebreather electronics? Perhaps you just want integrated decompression but don't want to rely on just one cell to prevent a debilitating bend. Cavers and extreme technical divers have long since known that when things go wrong, it's best to have a solid backup plan.
Narked at 90® exclusively offer this simple to fit system that is completely independent of your factory electronics. Even a complete electronics failure doesn't necessarily mean you can't get out 'on the loop'. No soldering, cutting or drilling is required. In fact, your unit can be returned to its original condition in minutes without trace.
This system comes with the 4th cell holder, 7 pin Fischer cable with isolation circuit and cell splitters and a fischer cover cap. All you need is a three cell dive computer (Available separately).
Available for the Shearwater and Liquivision X1 with X-Link dive and the DR5,
you can be sure that you are looked after in the water, and out..