Analox O2eII Pro Nitrox Analyser, new design, and new features from the leader in gas analysis systems. An easy to use, simple to read Nitrox Analyser is an absolute must for divers breathing anything other than air.
The O2eIIPro has the same form factor as the Analox O2eII but features a new color scheme and packaging that is kinder to the environment. The O2eIIPro can now be connected to a low-pressure inflator hose (not supplied), allowing you to double-check your gas mixture while your set is assembled, ideal when diving abroad in situations where you may not be the one putting your kit together.
The Analox O2eII is extremely simple to use, requiring only five simple steps to quickly and safely analyze your gas;
Turn the analyzer on
Calibrate by setting the oxygen percentage and exposing the sensor to fresh air for two minutes
Turn the cylinder on (crack the pressure) and establish a gentle flow
Take a reading by holding the sensor close to the cylinder valve
The display will freeze, showing an oxygen percentage accurate to one decimal point
The O2eii Pro is powered by a single 9V battery which can be changed easily by the user and is readily available around the globe. The oxygen cell is covered by a graded 36-month warranty and has an estimated working life of 4 to 5 years. This lifespan is easily achievable as long as the sensor is not stored in a high O2 environment i.e. removing the sensor dome and waving in the air to return the sensor to a normal oxygen level after use.