Real backup when you need it most!
Full redundant backup 3 cell PO2 monitoring kit. COMPUTER NOT INCLUDED
We've sold so many of these that rebreather manufacturers have made special tools to help service clients units with them on!
Note - do not change the lock nut supplied by APD, they have special tools that will only fit their nut.
Have you ever wished you had a fully independent backup to your rebreather electronics? Perhaps you just want integrated decompression but don't want to rely on just one cell to prevent a debilitating bend. Cavers and extreme technical divers have long since known that when things go wrong, it's best to have a solid back-up plan.
Narked at 90® exclusively offer this simple to fit system that is completely independent of your factory electronics. Even a complete electronics failure doesn't necessarily mean you can't get out 'on the loop'. No soldering, cutting or drilling is required. In fact, your unit can be returned to its original condition in minutes without trace.
This system comes with the 4/5 cell holder, cable with isolation circuit and cell splitters.
Building on the hugely successful 3 cell backup kit for the Vision and support from us in the UK, you can be sure that you are looked after in the water, and out.
This system comes with the 4/5 cell holder, 7 pin Fischer cable with isolation circuit and cell splitters. All you need is a three cell dive computer (Available separately).
If you require a complete system, please choose one from the menu on the left.
Available for the Shearwater pursuit-predator and Liquivision X1 with X-Link dive computers and Vr technology's computers with Fischer connector
And that's not all, once fitted you do not require tools to change the sensors, the cells holder is made in two parts and the cell part of the holder just pulls out, it takes 20 seconds to change a sensor!